H07VVH6-F Flexible Flat Elevator Cable 4 G 6mm² (450/700V)

Description

The H07VVH6-F is a flexible, flat PVC cable specially developed for moving applications such as cranes, elevators, hoists, cable reels and conveyors. Thanks to its flat construction and parallel wires, the cable is particularly suitable for installations where the cable repeatedly winds and unwinds or moves vertically. The maximum suspension length is up to 35 meters and the maximum pull-out speed 1.6 m/s.

This cable features flexible copper conductors (class 5) with PVC insulation and a PVC outer jacket. Depending on the cross-section, the rated voltage is 300/500 V (H05VVH6-F) or 450/750 V (H07VVH6-F). Thanks to its flame-retardant properties according to EN 60332-1 and robust mechanical properties, this cable is suitable for industrial applications where reliability and flexibility are required.

Key features:

• Flexible flat cable for moving applications
• Conductor: electrolytically annealed copper, class 5 according to EN 60228 / IEC 60228
• Insulation: flexible PVC type TI2 according to EN 50363-3
• Outer jacket: flexible PVC type TM2 according to EN 50363-4-1
• Black outer jacket with rip cord for easy removal
• Rated voltage:
  • H05VVH6-F (up to 1 mm²): 300/500 V
  • H07VVH6-F (from 1.5 mm²): 450/750 V
• Maximum conductor temperature: 70°C
• Maximum short-circuit temperature: 160°C (max. 5 s)
• Minimum operating temperature: 0°C with mobile installation
• Flame retardant according to EN 60332-1 / IEC 60332-1
• Reduced halogen emission (chlorine < 15%)
• Good resistance to oil and chemical influences
• Water resistance: AD5

Installation and use:

• For moving plants
• Suitable for vertical and rolling applications
• Use on cable reels, pulleys and moving systems
• Maximum hanging length up to 35 m
• Maximum pull-out speed 1.6 m/s
• Overlapping of cables during installation is not recommended

Typical applications:

• Cranes and gantry cranes
• Elevators and hoists
• Cable reels
• Conveyors
• Industrial moving equipment