BESS Battery Storage Cable 1 x 240mm² (0.6/1kV AC – 0.9/1.5kV DC)

REQUEST A QUOTE

Technical data

Conductor type

Copper, class 6 (ultraflexible)
Voltage

CPR-class

Halogen-free

Flame resistant

UV-resistant

Yes
Color

Tags: , , ,

Description

The BESS Battery Storage Cable 0.6/1 kV AC – 0.9/1.5 kV DC is specially designed for the most demanding battery energy systems (BESS) and grid installations. Thanks to its very high flexibility, installation is considerably easier, even in complex or difficult to access routes, directly contributing to lower installation costs. The cable is suitable for outdoor installation, in conduit, on cable tray or directly in the ground, without additional mechanical protection. Moreover, it can withstand humid conditions and even full immersion in water (AD8).

As structure, this cable has an electrolytically annealed copper conductor: class 5 (flexible) up to 150 mm² and class 6 (ultraflexible) from 185 mm². For insulation, cross-linked polyethylene is used (DIX-3 and XLPE), combined with a specially flexible PVC outer jacket (DMV-18 and ST2) in black finish. In addition, the cable is flame-retardant according to EN/IEC 60332-1, meets CPR fire class Eca (EN 50575) and features reduced halogen emission (<15% Chlorine).

Key features:

  • Ultraflexible copper conductor
    • Class 5 up to 150 mm²
    • Class 6 as of 185 mm²
  • XLPE insulation (DIX-3)
  • Flexible PVC outer jacket (DMV-18)
  • Rated voltage: 0.6/1 (1.2) kV AC
  • Rated voltage: 0.9/1.5 (1.8) kV DC
  • Maximum conductor temperature: 90°C
  • Short circuit temperature: 250°C (max. 5 s)
  • Minimum operating temperature: -40°C (fixed, protected installation)
  • Minimum installation temperature: 0°C
  • CPR response to fire: Eca
  • Flame retardant according to EN/IEC 60332-1
  • Water resistant: AD8 (suitable for immersion)
  • UV-resistant
  • Minimum bending radius: 5x cable diameter
  • Impact resistance: AG2

Installation options:

  • Outdoors
  • In tube
  • In cable duct
  • Directly into the ground
  • Applicable in damp areas and with full immersion (AD8)

Typical applications:

  • Battery energy storage systems (BESS).
  • DC connections between battery banks and inverters
  • Grid connections and distribution systems
  • Industrial energy infrastructure
  • Renewable energy installations

Note

The listed product information and technical data are compiled with the utmost care but may differ from reality. Images, specifications, and descriptions are indicative and non-binding.

TOP